The Bren gun is a series of light machine guns (LMG) made by Britain in the 1930s and used in various roles until 1992. While best known for its role as the British and Commonwealth forces' primary infantry LMG in World War II, it was also used in the Korean War and saw service throughout the latter half of the 20th century, including the 1982 Falklands War.
The Machine Gun Corps is probably one of the most difficult Great War units to research. It was one of the few “war raised” units, having no existence prior to the conflict, and suffering the ignominy of being disbanded entirely in the years immediately following. Researchers find it hard to understand why such a vast organisation (well over 100,000 serving soldiers, plus officers, at it.
Airborne Vickers Machine-gun Platoon (Plastic) (BR814) includes four Plastic Vickers Machine-gun teams and one Unit card. One of the machine-gun platoons located around Ranville has been used to provide indirect map fire for several units.
The official British Army designation for the current version is the L7A2 GPMG (General Purpose Machine Gun). The L7 was adopted by the British forces as a replacement for the long-serving Vickers machine gun (in the medium role) and the Bren (in the light assault role), following trials in 1957.
In the British Army, a rifle platoon from an infantry company consists of three sections of eight men, plus a signaller (radio operator), a platoon sergeant (a Sergeant), the platoon commander (either a second lieutenant or lieutenant) and a mortar man operating a light mortar (full strength of 27 men and one officer). Each section is commanded by a corporal, with a lance corporal as second-in.
The US Army placed its support weapons at the company and battalion levels, with each rifle company having a platoon of two light machine guns (the M1919 - which gave more support than a BAR, but was much heavier and more cumbersome), three bazookas (which were 2.36-inch rocket launchers) and three 60mm mortars; sometimes a heavy machine gun (of .50 calibre) was thrown into the mix, usually as.
The L7A2 GPMG, or 'GIMPY', is a 7.62x61mm belt-fed general purpose machine gun. The GPMG has been in service with the British military for decades. The GPMG can be carried by foot soldiers and employed as a light machine gun (LMG), although it has largely been replaced by the lighter 5.56x45mm minimi in this role in most regiments. Not willing to give up the GPMG's stopping power for.
This remained until the formation of Divisional Machine Gun Battalions in 1936 where guns were brigaded once again. Post-Second World War Upon the disbandment of Divisional Machine Gun Battalions in the post-WW2 restructure of the British Army, the Vickers Machine Gun assest reverted to individual Battalions as part of the Support Company as a Machine Gun Platoon.
The Machine Gun Platoon specialise in deploying and utilising the General Purpose Machine Gun (GPMG) in tactical environments. In Sustained Fire (SF) mode, a two-man crew can lay down 750 rounds-per-minute at ranges up to 1800 metres. Manning for the Machine Gun Platoon is primarily sourced from the Drums and Pipes platoon within the Irish Guards.
The L7A2 General Purpose Machine Gun (GPMG) is a 7.62 x 51mm belt-fed general purpose machine gun which can be used as a light weapon and in a sustained fire (SF) role. In the SF role, mounted on a tripod and fitted with the C2 optical sight, it is fired by a two-man team who are grouped in a specialist Machine Gun Platoon to provide battalion-level fire support.
Each Platoon would have a section armed with the light Lewis machine gun to provide supporting fire and to engage targets as they arose. The composition of the platoon was now to be a Platoon HQ (an officer (subaltern) and four men), with a Rifle section, Rifle Grenade Section, Lewis Gun Section and a Bombing Section (each Section being one 1 NCO and eight men).
The Machine Gun platoon of the Divisional Machine Gun Battalion started off as a 15-cwt Truck-borne unit. By the time the small arms manual was printed in 1944, it solely referred to the use of Universal Carrier.The quantity of gun numbers had also decreased in line with the additional efficiency of ammunition supply and the ability for carriers to get closer to the gun positions.
Machine-gun Platoon. Pack Contents: 1 Officer, 1 NCO, 5 Riflemen, 4 Watercooled .30 cals, 4 Gunners, 8 Loaders. 1 small base, 5 medium bases.
The following is the current organization of the British Army Rifle Platoon effective as of 2019. This organization followed the adoption of the L85A3 in 2018, as well as other organizational changes that are hot off the presses (such as the removal of the L110A2 or FN Minimi Para at the section level). This info is primarily based on feedback from servicemembers and from a source who is up to.
British Armoured Infantry Platoon - Supports Vickers Machine Gun Team: The last elements of my World War Two British Armoured Infantry Platoon are currently in the process of being acquired, namely a Machine Gun Team equipped with a 0.303 calibre Vickers machine gun mounted on a tripod and transported in a universal carrier, which could also be used as a mobile gun platform.The British Army is the land-based forces of the United Kingdom. The British Army was heavily involved in Imperial affairs in India and most regiments (both infantry and cavalry) served in India at some point. Throughout the nineteenth century, and into the twentieth century, a significant number of British troops were stationed at India at any one time. In 1847, for instance, around 20% of.Contains: 1x Rifle Company HQ (with 2 teams), 2x Rifle Platoons (each with 5 teams), 1x Machine-Gun Platoon (with 4 teams), 4x 3 Stokes Trench Mortars, 2x OQF 18 pdr Field Guns, 1x Mark V Male or Female Tank, 1x Mark IV Male or Female Tank, 1x Mark A Whippet Tank and 1x Sniper. Can't find the Games.